| Numéro d'article | ET013TT1 |
| Marque | E Ink |
| Taille | 1.3 |
| application | Wearable |
| Résolution | 256×256 |
| Composition | EPD, EPD |
| Luminosité | |
| CR | 11:1 |
| Couleurs | Monochrome |
| rétro-éclairage | No |
| Interface | 4-wire |
| marque | E Ink |
| maquette | ET013TT1 |
| taille diagonale | 1.3 inch |
| taper | EPD, EPD |
| format pixel | 256×256 279PPI |
| configuration | Rectangle |
| zone active | 23.3(H)×23.3(V) mm |
| contour sombre. | 27.1(H)×28.4(V) mm |
| luminosité | - |
| Rapport de contraste | 11:1 (Typ.) (RF) |
| direction de la vue | - |
| Temps de réponse | 3200 |
| angle de vue | - |
| mode de fonctionnement | - |
| couleur de soutien | Monochrome |
| Source de lumière | No B/L |
| lester | 0.40±0.04g |
| conçu pour | Wearable |
| fréquence d'images | - |
| Ecran tactile | Without |
| type d'interface | 4-wire SPI , 46 pins FPC |
| source de courant | 3.3/3.3V (Typ.)(VDD/VCC) |
| environnement | Operating Temperature: 0 ~ 50 °C ; Storage Temperature: -25 ~ 70 °C |
| ET011TJ2 | E Ink | 1.1 | 240×240 |
| ET011TT1 | E Ink | 1.1 | 220×220 |
| ET011TT2 | E Ink | 1.1 | 240×240 |
| ET013TT1 | E Ink | 1.3 | 256×256 |
| ET014TT1 | E Ink | 1.43 | 128×296 |
| ET014TT6 | E Ink | 1.43 | 128×296 |
| ET015ZJQ-N10 | BOE | 1.5 | 480×240 |
| ET017QC1 | E Ink | 1.7 | 240×320 |
| ET017QG1 | E Ink | 1.7 | 240×320 |
| ET018003DMU | EDT | 1.8 | 176×220 |
| ELF1308BAT | Futaba | 1.3 | 128×128 |
| GPN5018D41CB | Giantplus | 1.8 | 128×160 |
| HSD010HPW2-A00 | HannStar | 1.0 | 80×160 |
| LPM015M135A | JDI | 1.5 | 200×228 |
| OEL9M1027-W-E | TRULY | 0.96 | 64×128 |
| TA016XVHN05 | TIANMA | 1.6 | 152×486 |
| U141QLX01.0 | AUO | 1.4 | 320×360 |
| WEO004864AS | Winstar | 0.71 | 48×64 |
| WV011A6E-NB0 | BOE | 1.1 | 240×210 |
| WV013Z1U-N80-2QP0 | BOE | 1.3 | 240×240 |